this is information on a product in full production. february 2015 docid024717 rev 2 1/8 dsl02 low capacitance tvs for high speed lines such as xdsl datasheet - production data features ? high surge capability to comply with gr-1089 and itu-t k20/21 ? keeps its peak power capability up to t j max ? stand-off voltage: 5 v, 8 v, 10 v ? low capacitance device: c typ = 3 pf ? rohs package ? low leakage current: 0.5 a at 25 c complies with the following standards ? telcordia gr-1089 ? 2.5 kv 2/10 s - 500 a 2/10 s ? ac power fault tests ? itu-t k20/21/45 ? 6 kv 10/700 s - 150 a 5/310 s ? power induction tests ? power contact tests ? iec 61000-4-2, level 4 ? 15 kv (air discharge) ? 8 kv (contact discharge ? iec 61000-4-5, level 3 ? 2 kv, 42 ? ? mil std 883g-method 3015-7: class 3 ? 8 kv (human body model) description dsl02 is designed to protect dsl line drivers against surges defined in worldwide telecommunication standards. this device protects line drivers of various systems such as adsl and vdsl. the low capacitance makes it suitable from adsl to vdsl data rates. dsl02 is able to survive severe conditions even when used with downgraded or oscillating gas tube. dsl02 is also suitable to be used on other lines when iec61000-4-5 surge capability is required. dsl02 is packaged in a sot23-5l. figure 1. functional diagram 6 2 7 / 6 & i/o1 i/o2 i/o2 i/o1 i/o2 www.st.com
characteristics dsl02 2/8 docid024717 rev 2 1 characteristics table 1. absolute ratings (t amb = 25 c) symbol parameter value unit v pp peak pulse voltage iec 61000-4-2, contact discharge 30 kv i pp peak pulse current 8/20 s 30 a t stg t j storage temperature range operating junction temperature range -55 to 150 -40 to 125 c c t l maximum temperature for soldering during 10 s 260 c table 2. electrical characteristics (t amb = 25 c) order code i rm @ v rm v br @ i br v cl @ i pp (8/20 s) c c max. a v min. v ma max. v a typ. pf (1) max. pf (1) typ. pf (2) DSL02-005SC5 0.5 5 6 1 18 24 3 5 0.3 dsl02-008sc5 0.5 8 10 1 22 24 3 5 0.3 dsl02-010sc5 0.5 10 11 1 24 24 3 5 0.3 1. test conditions: v r = 2 v bias, v rms = 1 v, f = 1 mhz 2. measured between 1 v and v rm figure 2. peak pulse power dissipation versus initial junction temperature (typical values, 8/20s) figure 3. leakage current versus junction temperature (typical values) 0 100 200 300 400 500 600 700 800 900 1000 0 25 50 75 100 125 150 p pp (w) 8/20 s t j (c) i r (na) 0 1 10 100 25 50 75 100 125 v r =v rm t j (c)
docid024717 rev 2 3/8 dsl02 characteristics 8 figure 4. junction capacitance versus reverse voltage applied (typical values) figure 5. xdsl2 modem connection c (pf) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 12345678 f=1 mhz v osc =1v rms t j =25 c v r (v) for lower voltages, maximum voltage applied is limited to v rm 9 / ' 9 / ' 9 / ' 9 / ' / l q h g u l y h u v
package information dsl02 4/8 docid024717 rev 2 2 package information ? epoxy meets ul94, v0 ? lead-free package in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. figure 6. sot23-5l dimension definitions table 3. sot23-5l dimension values ref. dimensions millimeters inches min. typ. max. min. typ. max. a 0.90 1.45 0.035 0.057 a1 0 0.15 0 0.006 a2 0.90 1.30 0.035 0.051 b 0.30 0.50 0.012 0.020 c 0.09 0.20 0.004 0.008 d 2.80 3.05 0.11 0.118 e 1.50 1.75 0.059 0.069 e 0.95 0.037 h 2.60 3.00 0.102 0.118 l 0.30 0.60 0.012 0.024 m 0 10 0 10 a2 a l h c b e d e e a1 q
docid024717 rev 2 5/8 dsl02 package information 8 figure 7. footprint recommendations dimensions in mm (inches) figure 8. marking layout x x x x
pcb recommendation dsl02 6/8 docid024717 rev 2 3 pcb recommendation figure 9. recommended layout concerning figure 9 : ? pins 1 and 5 must be connected together. ? pins 3 and 4 must be connected together. ? pin 2 must not be connected 1 4 2 3 5 pcb tracks 1 4 2 3 5 pcb tracks
docid024717 rev 2 7/8 dsl02 ordering information 8 4 ordering information figure 10. ordering information scheme 5 revision history table 4. ordering information order code marking package weight base qty delivery mode DSL02-005SC5 yt05 sot23-5l 16 mg 3000 tape and reel dsl02-008sc5 yt08 dsl02-010sc5 yt10 dsl 0x - vvv sc5 dsl protection version stand-off voltage 010 = 10 v package sc5 = sot23-5l table 5. document revision history date revision changes 30-oct-2013 1 initial release. 03-feb-2015 2 updated features and description . added figure 5 .
dsl02 8/8 docid024717 rev 2 important notice ? please read carefully stmicroelectronics nv and its subsidiaries (?st?) reserve the right to make changes, corrections, enhancements, modifications, and improvements to st products and/or to this document at any time without notice. purchasers should obtain the latest relevant in formation on st products before placing orders. st products are sold pursuant to st?s terms and conditions of sale in place at the time of o rder acknowledgement. purchasers are solely responsible for the choice, selection, and use of st products and st assumes no liability for application assistance or the design of purchasers? products. no license, express or implied, to any intellectual property right is granted by st herein. resale of st products with provisions different from the information set forth herein shall void any warranty granted by st for such product. st and the st logo are trademarks of st. all other product or service names are the property of their respective owners. information in this document supersedes and replaces information previously supplied in any prior versions of this document. ? 2015 stmicroelectronics ? all rights reserved
|
